Z2 Black laser

Z2 Black laser


Z2 Black laser

Z2 Black laser
Z2 Black laser
Z2 Black laser
Warranty : 10 years
Storage from +5°C to +35°C : 3 years
Type of installation : From +12°C to +25°C
Lenght : 50 m
Width : 122 cm
Thickness : 230 µ
Kraft paper release liner : Yes
Stretchable : Yes
Calendred polymeric : Yes
Interior installation : Yes
Outside installation : No
UV-Resistant : Yes
Permanent Air Release Adhesive : Yes
Appearance : Satin
Primer/Primer + : Yes
F/R : Yes
CE : Yes
VOC : Yes
RAIL : Yes
Adhesive strength
20 minutes after installation: 1.04 kg/cm
24 hours after installation: 1.43 kg/cm
3 days after installation: 1.51 kg/cm
7 days after installation: 1.65 kg/cm
Adhesive strength at high temperature
After the 1st day: 1.37 kg/cm
After 7 days: 1.03 kg/cm
This product offers exceptional resistance to water, dirt, abrasion, UV rays and wear (yellowing, crackling, scaling, delamination).
A quick and easy material to maintain, its external surface's remarkable qualities facilitate cleaning, prevent marking and impede mould growth. Maintenance can be performed with all types of household cleaning products, other than abrasive products such as acetone or white spirit.
Non-contractual visuals and data, Cover Styl’ reserves the right to change the composition of its films at any time.
The rendition of the colours and finishes on the computer may vary according to the screen and not give a true representation of the true appearance. We therefore recommend you order a sample on line or contact us so that we can examine the finish that best adapts to your requirements. Due to the slight differences in colour in production runs, we advise you to purchase the amount you require in one go to avoid any difference in appearance in the execution of your Cover Styl’ project.


Free sample Download the data sheet Download the scan


We are here to support you carrying out your project.

Cookies and other technologies
By clicking on